Comfort H/S Bite Splint

Comfort H/S Bite Splints are thermoformed using a hard co-polyester with a soft inner layer of polyurethane. Comfort H/S Bite Splints are thermoformed for ideal retention.


The Comfort H/S Bite Splint occlusal splint is made to protect the occlusal surfaces of the teeth from damage or wear. Comfort H/S Splints can be fabricated for the upper or the lower arch.

Benefits for the Patient

  • Protects cosmetic restorations such as veneers and crowns.
  • Relieves discomfort caused by bruxing, clenching and TMJ.
  • The polyurethane layer enhances the durability and comfort of the bite splint.

Prep Requirements: Impression, Bite Registration Guidelines

Start with an accurate, void-free impression of both arches. Ensure no tears or bubbles are present in impression material for precision fit. Instruct patient to close into centric relation to verify midline position and bite. Then, place two cotton rolls behind the cuspids and instruct patient to close; with patient in open bite, inject bite registration into the posterior openings of both quadrants. In addition, inject bite registration into anterior opening to capture a complete open construction bite.

Patient Delivery

Seat splint and evaluate fit and retention. If adjustments are necessary, adjust with carbide bur or Lisko-S disc. Polish if needed. Once seated in the patient's mouth, check bite with marking tape to identify premature occlusion; adjust and polish as needed.

ADA Codes

  • D9940 - Occlusal Guard

Comfort H/S Bite Splint is a trademark of Glidewell Laboratories. Streaming video courtesy of Glidewell Laboratories.

On-time Delivery – Exceptional Quality
Send your first case with a unique savings offer
Get Started